Silicone casting mould Mini crockery

Silicone casting mould Mini Tableware, 6-part, various moulds. The mini moulds consist of a top and a bottom half that are placed together. The liquid casting compound is poured in through the hole at the top using the pipette. After the casting compound has fully cured, the two halves can be separated and the finished cast item can be removed. The supplied pipette is intended for filling the very small casting moulds.
Dimensions: large plate ø 34 mm, small plate ø 25 mm, large bowl ø 27 mm, height 13 mm, small bowls ø 22 mm, height 8 mm, cup ø 13 mm, height 10 mm
High-quality silicone casting mould for casting creative-cement, creative-cement 5-in-1, jewellery-cement, Raysin casting powder or casting resin (not food-safe).
Material requirements: Raysin 200 about 9 g, very fine white casting compound
Not recommended for use with creative-cement, since its coarse grain makes it unsuitable for delicate mini tableware.
The casting mould is made of high-quality silicone, extremely elastic, dimensionally stable and frost- and heat-resistant (from -40°C to +240°C). Thanks to the extremely elastic silicone material, the shapes can be easily demoulded after drying. Clean the mould afterwards with water and some dishwashing detergent; thus, it retains its shape and can be reused.
The most suitable paints and media for painting, writing on and adorning are the acrylic paints, e.g. Outdoor Paint, Allround Paint, Ultimate Sheen, Chalky Finish chalk paint, markers, decorative metal and much more.